SPADA DECALS from EUROPE
The WORLD's LEADER in CUSTOM WWI PROFILE DECALS
UPDATED: AUG 8, 2019 |
IMAGE |
STATUS |
SPADA DECALS |
USD |
NIEUPORT 11 SERIES
|
|
SD-Ni114803
|
Austro-Hungarian/Russian
MAIN IMAGE |
$14.00 |
Out Thousands of Nieuport's were built during the War Only one
Surviving Ni17 exists today, restored by the Brussels' Army Museum.
The Nieuport was a classic marques during a period extending
from 1915 to 1917.
It evolved from the Nieuport 10 Two seater. The Single seat 80 hp
Fighter was designated the Nieuport 11. A 110 hp version was
designated the Nieuport 16. Both had a 13 meter wing span.
The added weight of the heavier Engine necessitated a re-design
and a 15 meter wing Span Nieuport 17 was the result. Variants
continued with different power plants and configurations. Nearly
every French Escadrille at one time saw them in Service.
These French Fighters were not only Operated by the French
and Lafayette Escadrille, but by the Belgians, and British, as
well as Captured German Aircraft from which developed the
Siemens-Schuckert D.I. . They were also built under License
and operated by both the Russians and Italian's Macchi-Built Nieuport's.
SPADA is Proud to Present the Nieuport Series Decals:
|
NIEUPORT 17 SERIES
|
|
SD-Ni174816
|
Escadrille 26 Mdl
Constant Soulier France
Jan 1917 Nieuport 17
MAIN IMAGE |
$14.00 |
|
SD-Ni174812
|
Escadrille 3 Adj Rene'
Dorme
Nieuport 17
MAIN IMAGE |
$14.00 |
|
SD-Ni174808
|
RUSSIAN Ni17
RUSSIAN FRONT NIEUPORT 17'sNieuport 17 'Russian'
MAIN IMAGE |
$14.00 |
|
SD-Ni174806
|
GERMAN Ni17 (1 Profile)
GERMAN CAPTURED
FRENCH NIEUPORT 17
AIRCRAFT
MAIN IMAGE |
$9.50 |
|
SD-Ni174802
|
LL-Ni17-02: French
Escadrille 31
MAIN IMAGE |
$9.50 |
WOOD EFFECT SERIES
There are Seven Distinct Wood Grain Effect Patterns available in
Any Scale
Sheet Dimensions: 8 1/2 x 5 3/4
Total Decal Dimensions: 8 x 4 7/8 / 205 mm x 125 mm
Total Square Area : 39 sq in / 256 sq cm
Best Used over a Base Coat Wood Color of your choice which
maybe Pre-Shaded/Washed or Weathered before Decal
Application. SPADA recommends adding/dissolving a little
White Glue (Elmers) to the water you use to soak/remove the
Water Slide backing to enhance permanent adhesion.
|
|
SD-WE48006
|
WOOD EFFECT SERIES
MAIN IMAGE |
$12.00 |
|
SD-WE48002
|
WOOD EFFECT SERIES
MAIN IMAGE |
$12.00 |